In this article, we will share with you the Pinout and Testpoint of Samsung Galaxy A32. You can flash stock rom, bypass frp or reset user data on your device through Z3X using Pinout.
Tutorial
- Remove the back cover from the phone. Disconnect the battery from the motherboard, remove the fingerprint sensor and camera.
- Remove the screws from the motherboard and remove it.
- On the motherboard, identify the 6 eMMMC pins. The pins are Dat 0, CLK, CMD, GND, VCC, and VCCQ. You will have to cut the cage to see them.
- Use the UFI box and take the jack out of it. You will see the same pins as the jack I mentioned.
- Solder 4 pins: Dat0, CLK, CMD and GND with jumper between motherboard and adapter. Leave VCC and VCCQ for USB to power them.
- Place the adapter inside the UFI box. Connect the box to the computer.
- Connect the motherboard to the phone's battery. Then put the USB cable in the phone and connect it to the computer.
Repair Samsung Galaxy A32 dead boot or any brand phone you need two best protectors on the market, one is easy jtag plus and the other is ufi box both are the best in the market. These boxes help some phones after flashing wrong software not showing boot on screen, you need those boxes for boot repair. Some brands can't remove the key such as a key, pattern, password, FRP and MDM this key actually supports key removal.
Bypass FRP Samsung Galaxy A32 with UFI Dongle
- Run the UFi Box software.
- Select "Direct eMMC (ISP)"
- Now, click Identify eMMC. It will recognize your device by software to proceed further
- Go to the User Partition tab and click Special Task. Select Factory reset from the list of options.
- Disconnect all connections and assemble your phone. Turn on your phone and enjoy
- Done.
Tags:
Samsung
