Solution for not charging problem on Samsung Galaxy M51
In the image below we are going to share with you the Samsung Galaxy M51 charging circuit and test its jumper continuity using a multimeter if there is any damage that will damage the jumpers on the board Samsung Galaxy M51 owner.
- First, open your cell phone
- Then clean the charging connector part of the mobile motherboard
- Next, remove the old charging connector and add a new one
Here are some steps to fix Samsung Galaxy M51 charging problem
1. Check the USB charging port
The cause of Samsung Galaxy M51 not charging may be due to damaged USB port corroded. Change the charging USB port immediately, if it is damaged and does not cause problems with the charger on the phone.
 |
| Samsung Galaxy M51 Charging Solution |
2. Circuit and voltage test
Do a line check on the board if there is damage or the lines are disconnected, apply the jumper on the PCB board. And also check the components that can make the charger not damaged or not, replace the components.
The schematic image is listed above, there is a faulty component of the Samsung Galaxy M51 phone that is not charging. Immediately replace the defective part with a replacement part in good condition.
Doing some of the above can fix the Samsung Galaxy M51 not charging error, make sure you've checked the damage carefully. Use a multimeter to measure the conditions on each component and the path on the PCB board is damaged.
Those are some of the ways to fix Samsung Galaxy M51 that won't charge because damage like this happens very often. For more information and new tips and tricks on solving problems of other Android phones. Continue to visit this page. We will update it if there is a new update.